Dell Client Management Pack Version 4.
This readme provides information on the Dell Client Management Pack version 4.1, which can be imported into Microsoft(R) System Center Operations Manager (SCOM) 2007 SP1/R2 and System Center Essentials (SCE) 2007 SP1/2010. NOTE: All references to Operations Manager are also applicable to System Center Essentials. The Dell Client Management Pack version 4.1 enables SCOM/SCE to discover and monitor the status of Dell Client systems, on a defined network segment.
Prerequisites This section provides information on the minimum requirements for installing and using the Dell Client Management Pack version 4.1 for Microsoft System Center Operations Manager 2007 SP1/R2 and Microsoft System Center Essentials 2007 SP1/2010. Requirements for Managed node: * Dell(TM) OpenManage(TM) Client Instrumentation: The recommended version of Dell OpenManage Client Instrumentation (OMCI) is 8.0.1 NOTE: If the OMCI version available on a client system is earlier than 7.
Issue 2 - DF337447, DF487238: Improper display of attribute "Operating System" for Dell Clients in the SCOM Detailed view. Description While discovering a Client machine with Windows Vista installed in it, value for attribute "Operating System" is displayed as "Microsoftr Windows VistaT Ultimate" instead of "Microsoft® Windows Vista™ Ultimate". Similarly, "Microsoftr Windows VistaT Business" instead of "Microsoft® Windows Vista™ Business". Resolution No known resolution.
Issue 5 - DF487533: Few attributes value of Dell Client are shown as empty when OMCI is downgraded from OMCI 8.0 to OMCI 7.8 Description After downgrading OMCI from 8.0/8.0.1 to 7.8, you may see few attributes value of Dell Client shown as empty. These attributes are model type, asset tag, service tag, bios version and manufacture ship date. Resolution Restart the Dell Client after downgrading OMCI from 8.0 to 7.8.
Issue 8 - DF501257: FAN health status does not change even after FAN stops. Description On Optiplex 990(with bios: A05), 390(with bios: A01) and Precision T1600 (with bios: A01), FAN health status does not change even after FAN stops, and it remains unchanged even after the reboot of client system. Resolution No known resolution. Versions Affected Microsoft System Center Operations Manager (SCOM) 2007 SP1/R2, System Center Essentials (SCE) 2007 SP1/2010 and OMCI 8.0.
