Owners Manual

Performing Power Management
To Reboot and Shutdown your remote client-systems:
1. Launch the Dell Intel vPro AMT Plugin.
For more information, see Launching The Dell Intel vPro AMT Plugin.
2. On the Home screen click Operations.
3. On the Operation window, click Power Management.
The Power Management tab is displayed.
4. Select the power control operation you want to execute on the client-systems from the drop-down list.
5. Click Next.
The Select Clients tab is displayed.
6. Search for the client-systems you want apply the Power Management changes.
7. Select the client-systems you want to apply the Power Management changes and click Add.
8. Click Next.
The Schedule Task tab is displayed.
9. You can either choose to apply the task immediately or schedule it to run at a later time.
10. Provide a brief description of the task you are applying and click Finish.
11. Depending on your schedule, select one of the following options:
● Run now — the power management changes are immediately applied and displays the Running status in the Task
Queue.
NOTE: If your client systems are not connected to the network, you have to run the task again.
● Run At — the power management changes are queued in the Task Queue.
NOTE: You can launch the Task Queue to view the list of completed and pending tasks.
Establishing KVM Sessions
To establish KVM sessions with remote client systems with Intel graphics card:
1. Launch the Dell Intel vPro AMT Plugin.
For more information, see Launching The Dell Intel vPro AMT Plugin.
2. On the DCIP’s Home screen click Operations.
3. On the Operation window, click KVM Connect.
The KVM Connect tab is displayed.
4. Search for the list of client systems on which you want establish KVM sessions.
5. Select the client system on which you want to start the KVM session and click Start.
Generating Reports
This feature allows you to generate and view OOB Manageability, Provisioning, Battery Health of notebook client-systems, and
Hardware Inventory reports.
1. Launch the Dell Intel vPro AMT Plugin.
For more information, see Launching The Dell Intel vPro AMT Plugin.
2. On the Home screen click Reports.
3. On the Welcome screen you can generate the following reports:
● OOB Manageability — you can see the AMT Management Engine configuration for client systems.
● Provisioning — view the provisioning status of all the client systems in the network.
● Battery Health — view the battery health of all the AMT enabled client systems on the network.
● Hardware Inventory — collect the inventory information of all the client systems on the network.
4. After selecting the type of report you want, you can perform one of the following actions:
● Schedule — for more information, see Scheduling Reports.
24
Dell Intel vPro AMT Plugin