Owners Manual
Table Of Contents
- Dell Client Integration Pack for Microsoft System Center 2012 SP1 Configuration Manager And System Center 2012 Configuration Manager Version 3.1 User’s Guide
- Introduction
- Using DCIP With Configuration Manager
- Dell Warranty Utility
- Dell Intel vPro AMT Plugin
- Troubleshooting
- Authenticode Signature
- Windows XP Installation Fails
- KVM Over Wireless
- Hardware Inventory Report Memory Speed is reported as Zero
- Max Password Length Change
- KVM Power Control to Boot to OS in S3
- Windows XP(x86) OS Deployment Hangs During Installation
- Apply Operating System Task Sequence Action Has A Red Bang
- Related Reference
● Schedule — to schedule a time for client system's hard disk wipe. For more information, see Scheduling Wipe Client
Disk.
NOTE: To schedule a Remote Wipe Client Disk operation, the client must be accessible through a network.
● Retrieve — to retrieve status of client system's hard disk wipe. For more information, see Retrieving Wipe Client Disk
Status.
Scheduling Wipe Client Disk
Wipe Client Disk feature will format the hard disks of the Dell client systems. To schedule a Wipe Client Disk:
1. Click Schedule.
The Select Clients tab is displayed.
2. Search for the list of client systems you want to view the reports on.
3. Select the client systems you want to view the reports and click Add.
4. Click Next.
5. The Schedule Report tab is displayed.
6. You can either choose to apply the task immediately or schedule it to run at a later time. Depending on your schedule, select
one of the following options:
● Run now — the wipe client disk operations are immediately applied and displays the Running status in the Task Queue.
NOTE: If your client systems are not connected to the network, you have to run the task again.
● Run At — wipe client disk operations are queued in the Task Queue.
NOTE: You can launch the Task Queue to view the list of completed and pending tasks.
7. Provide a brief description of the Task you are applying and click Finish.
NOTE:
It is recommended to run the Retrieve Wipe Client Disk Status task to make sure that the hard drives of the
client systems have been formatted successfully. For more information see, Retrieving Wipe Client Disk Status.
Retrieving Wipe Client Disk Status
NOTE: Retrieve requests the status of the Wipe Client Disk Operation.
NOTE: After the remote hard drive wipe command has been issued from the server to the client system, the status in
the report changes to Complete. The format process on the client system will begin only after the status changes to
Complete.
To retrieve the status:
1. Click Retrieve.
The Select Clients tab is displayed.
2. Search for the list of client systems you want to view the reports on.
3. Select the client systems you want to view the reports. Click Add.
4. Click Next.
5. The Retrieve Client Status tab is displayed.
6. You can either choose to apply the task immediately or schedule it to run at a later time. Depending on your schedule, select
one of the following options:
● Run now — the status of Wipe Client Disk operations is immediately retrieved and displays the Running status in the
Task Queue.
NOTE: If your client systems are not connected to the network, you have to run the task again.
● Run At — the status is queued in the Task Queue.
NOTE: You can launch the Task Queue to view the list of completed and pending tasks.
7. Provide a brief description of the Task you are applying and click Finish.
Dell Intel vPro AMT Plugin
23