Owners Manual
Table Of Contents
- Dell Client Integration Pack for Microsoft System Center 2012 SP1 Configuration Manager And System Center 2012 Configuration Manager Version 3.1 User’s Guide
- Introduction
- Using DCIP With Configuration Manager
- Dell Warranty Utility
- Dell Intel vPro AMT Plugin
- Troubleshooting
- Authenticode Signature
- Windows XP Installation Fails
- KVM Over Wireless
- Hardware Inventory Report Memory Speed is reported as Zero
- Max Password Length Change
- KVM Power Control to Boot to OS in S3
- Windows XP(x86) OS Deployment Hangs During Installation
- Apply Operating System Task Sequence Action Has A Red Bang
- Related Reference
Launching The Dell AMT vPRO Plugin
To launch the Dell Intel vPro AMT Plugin:
On systems running Windows Server 2008 or older:
Click Start > All Programs > Dell > Client Integration Pack for Microsoft ConfigMgr 2012 > Dell AMT Plugin.
On systems running Windows Server 2012:
Launch the Start screen and click Dell AMT Plugin.
Database and Password Configuration
The window is displayed the first time you launch the . You can configure the following settings:Dell Intel vPro AMT Plugin
Database and Password Configuration
1. Retrieve and select the available SCCM SQL Server option from drop-down list.
2. Select the type of SQL Server Security (Integrated or Username / Password) you want to set.
3. Retrieve and select the available SCCM Database from the drop-down list.
4. Configure the Windows Account settings.
5. Configure the AMT ME Account settings.
USB Provisioning
Before Intel Active Management Technology-based client systems is managed out-of-band by Dell Intel vPro AMT Plugin, you
must provision them for AMT.
Provisioning Using A USB Device
The client systems on the network have to procure a digital provisioning certificate before deploying Intel vPro AMT
management application using remote configuration.
To export your certificate hash to the client systems using a USB storage device:
1. Launch the Dell Intel vPro AMT Plugin.
For more information, see Launching The Dell Intel vPro AMT Plugin.
2. On the Home screen, click USB Provisioning.
The USB Provisioning window is displayed.
3. Enter your Management Engine (ME) password in the Current Password section, and then enter a New Password for
AMT and confirm it.
NOTE:
The AMT password must contain a minimum of eight characters made up of uppercase, lowercase, numbers, and
non-alphanumeric characters excluding :, _, and ".
4. Browse and point to the location of the USB storage device.
5. The application will detect and select the file format of your USB storage device.
NOTE: For AMT5 or older, select the Format Drive option and format the USB storage device to a FAT 16 file format.
6. Select the Enable remote configuration of user consent policy option if you want to allow the administrator to override
the client system's user consent policy.
7. Depending on the version of AMT you are targeting select the Setup File Version from the drop-down list.
NOTE: For AMT version 5 or older use setup file version 2 or 2.1, for AMT version 6 to 9 use setup file version 3 or 4.
8. Select the type of Hash Algorithm depending of the type of Setup File Version you have selected.
NOTE: The Hash Algorithm SHA256 and SHA384 are available for setup file version 3 or higher only.
Dell Intel vPro AMT Plugin 19