Users Guide
Database and Password Configuration
The window is displayed the first time you launch the . You can configure the following settings:Dell Intel AMT Plug-in
Database and Password Configuration Dell AMT Plugin
1. Retrieve and select the available SCCM SQL Server option from drop-down list.
2. Select the type of SQL Server Security (Integrated or Username / Password) you want to set.
3. Retrieve and select the available SCCM Database from the drop-down list.
4. Configure the Windows Account settings.
5. Configure the AMT ME Account settings.
USB Provisioning
Before Intel Active Management Technology-based client systems is managed out-of-band by DCIP for Configuration
Manager, you must provision them for AMT. For more information on AMT Provisioning see, the Microsoft KB article at
technet.microsoft.com/en-us/library/gg712319.
Provisioning Using A USB Device
Deploying Intel vPro OOB management platforms using remote configuration requires a digital provisioning certificate to
be procured by the client systems.
To export your certificate hash to the client systems using a USB storage device:
1. Launch the AMT plug-in. For more information, see Launching the AMT Plug-in.
2. On the DCIP’s Home screen, click USB Provisioning.
The USB Provisioning window is displayed.
3. Enter your Management Engine (ME) password and then enter a New Password for AMT and confirm it.
NOTE: The AMT password must contain a minimum of eight characters made up of uppercase, lowercase,
numbers, and non-alphanumeric characters excluding :, _, and ".
4. Browse and point to the location of the USB storage device.
5. The application will detect and select the file format of your USB storage device.
NOTE: For iAMT5 or older select the Format Drive option and format the USB storage device to a FAT 16 file
format.
6. Select the Enable remote configuration of user consent policy option if you want to allow the administrator to
override the client system's user consent policy.
7. Depending on the version of AMT you are targeting select the Setup File Version from the drop-down list.
NOTE: For AMT version 5 or older use setup file version 2 or 2.1, for AMT version 6 to 7 use setup file version 3
or 4.
8. Select the type of Hash Algorithm depending of the type of Setup File Version you have selected.
NOTE: The Hash Algorithm SHA256 and SHA384 are available for setup file version 3 or higher only.
9. Select the OOB Provisioning (enabling will start hello packets immediately) option if you want to send hello packets
immediately.
10. Select the Consumable Records option to record the systems that are provisioned.
11. Browse and select the Certificate File you want to apply on your client systems for iAMT provisioning.
28