Users Guide
56 Troubleshooting
lost during the transfer process. To re-establish the connection, the user must
select ConnectionStart. Also note that when control of the wireless link is
automatically reverted back as a result of the Link Preference Timeout
expiring, there is no loss of connectivity. There are individual timeout values
for the each shutdown/reboot operation (defined in KVMView app.config
settings) that can be configured externally:
•LPTImeoutRebootToOS
• LPTimeoutRebootToBIOS
• LPTimeoutRebootToDiagnostics
• LPTimeoutRebootWithIDER
•LPTimeoutShutdown
For more information, see
http://software.intel.com/sites/manageability/AMT_Implementation_and_
Reference_Guide/DOCS/Implementation%20and%20Reference%20Guide/
default.htm.
Hardware Inventory Report Memory Speed is
reported as Zero
This is a DMTF issue where memory speed is defined in seconds. SCCM
Resource Explorer today reports this as 0.
Max Password Length Change
Some systems BIOS do not support reducing the Maximum password length
down from 32. This is known issue being worked on at the time of release of
the product.
KVM Power Control - Boot to OS in S3
If after a KVM connection is established, the AMT client enters power state
S3 or S4, the KVM connection is lost within 30 seconds of entering the sleep
state. (This occurs in both wired and wireless environments.) In such a case,
the administrator will need to restart the connection (ConnectionStart),
before issuing a reboot command (OS, BIOS, Diagnostics, IDE-R).
client_sccm.book Page 56 Tuesday, September 27, 2011 9:17 AM