Users Guide

50 Intel vPro OOB Management Extensions
5 Click Save and Finish.
KVM Setup
This feature allows you to configure and setup your Keyboard, Video, and
Monitor (KVM) sessions.
NOTE: Before a remote KVM session can be established, KVM must be enabled
through the Intel Management Engine BIOS Extension (MEBx) interface.
1 Launch the AMT plug-in. For more information, see Launching the AMT
Plug-in.
2 On the DCIP’s Home screen, click Client Configuration .
3 On the Client Configuration window, click KVM Setup .
The
KVM Setup tab is displayed.
4 Select the Default Video Screen , that is the screen you want to connect at
the start of the KVM session.
5 If you want the user to provide consent, select the User Consent check
box.
6 Set the time-out through the User Consent Timeout .
7 Set the time frame for the KVM session to time-out after a period of
inactivity using the
Session Timeout.
8 Click Finish .
Logging
Set your preferences for the type of logs you want to be captured by DCIP.
1
Launch the AMT plug-in by clicking Start  All Programs  Dell 
Client Integration Pack for Microsoft ConfigMgr  Dell AMT Plugin.
2 On the DCIP’s Home screen, click Preferences .
3 On the Welcome screen, click Logging .
The
Logging screen is displayed.
4 Select one of the following type of Logs:
•
None — no logs are captured.
•
Normal — typical logging for client systems operating normally. This
is the recommended setting.
client_sccm.book Page 50 Tuesday, September 27, 2011 9:17 AM