Users Guide

46 Intel vPro OOB Management Extensions
13 Depending on your schedule, select one of the following options:
•
Run now — the BIOS password configuration is immediately applied
and displays the
Running status in the Task Que ue .
NOTE: If your client systems are not connected to the network, you have to
run the task again.
•Run At — the BIOS password configuration is queued in the Ta sk
Queue
.
NOTE: You can launch the Task Queue to view the list of completed and
pending tasks.
Operations
This features allows you to cold and warm reboot your client-systems and
setup KVM sessions
Performing Power Management
To Reboot and Shutdown your remote client-systems:
1
Launch the AMT plug-in. For more information, see Launching the AMT
Plug-in.
2 On the DCIP’s Home screen click Operations .
3 On the Operation window, click Power Management .
The
Power Management tab is displayed.
4 Select the power control option you want to on the client-systems from the
drop-down list.
5 Click Next .
The
Select Clients tab is displayed.
6 Search for the client-systems you want apply the Power Management
changes.
7 Select the client-systems you want to apply the Power Management
changes and click
Add .
8 Click Next .
The
Schedule Task tab is displayed.
client_sccm.book Page 46 Tuesday, September 27, 2011 9:17 AM