Users Guide

Intel vPro OOB Management Extensions 43
9 Search for client systems you want to apply the Boot Order changes.
10 Select the client systems you want to apply the Boot Order changes and
click
Add .
11 Click Next .
The
Schedule Task tab is displayed.
12 You can either choose to apply the changes immediately or schedule it to
run at a later time.
13 Provide a brief description of the changes you are applying and click
Finish .
14 Depending on your schedule, select one of the following options:
•
Run now — the Boot Order changes are immediately applied and
displays the
Running status in the Task Que ue .
NOTE: If your client systems are not connected to the network, you have to
run the task again.
•Run At — the Boot Order changes are queued in the Task Que ue .
NOTE: You can launch the Task Queue to view the list of completed and
pending tasks.
Configuring BIOS Settings
This feature allows you to configure and change the BIOS settings.
1
Launch the AMT plug-in. For more information, see Launching the AMT
Plug-in.
2 On the DCIP’s Home screen click Client Configuration .
3 On the Client Configuration window, click BIOS Settings .
The
BIOS Settings tab is displayed.
4 Make the changes you want to the BIOS settings for your client-systems
and select the check box under
Apply .
5 If you want the Task execution to continue to subsequent clients systems
when an error occurs, select the
Continue on error check box. Otherwise,
Task execution will stop on the first client system where an error is
encountered.
client_sccm.book Page 43 Tuesday, September 27, 2011 9:17 AM