Users Guide

40 Intel vPro OOB Management Extensions
Provisioning Using your USB Device
Deploying Intel vPro OOB management platforms using remote
configuration requires a digital provisioning certificate to be procured by the
client systems.
To export your certificate hash to the client systems using a USB storage
device:
1
Launch the AMT plug-in. For more information, see Launching the AMT
Plug-in.
2 On the DCIP’s Home screen, click USB Provisioning .
The
USB Provisioning window is displayed.
3 Enter your Management Engine (ME) password and then enter a New
Password
for AMT and confirm it.
NOTE: The AMT password must contain a minimum of eight characters made
up of uppercase, lowercase, numbers, and non-alphanumeric characters
excluding
:, _, and ".
4 Browse and point to the location of the USB storage device.
5 The application will detect and select the file format of your USB storage
device.
NOTE: For iAMT5 or older select the Format Drive check box and format the
USB storage device to a FAT 16 file format.
6 Select the Enable remote configuration of user consent policy check box
if you want to allow the administrator to override the client system's user
consent policy.
7 Depending on the version of AMT you are targeting select the Setup File
Version
from the drop-down list.
NOTE: For AMT version 5 or older use setup file version 2 or 2.1, for AMT
version 6 to 7 use setup file version 3 or 4.
8 Select the type of Hash Algorithm depending of the type of Setup File
Version you have selected.
NOTE: The Hash Algorithm SHA256 and SHA384 are available for setup file
version 3 or higher only.
9 Select the OOB Provisioning (enabling will start hello packets
immediately)
check box if you want to send hello packets immediately.
client_sccm.book Page 40 Tuesday, September 27, 2011 9:17 AM