Users Guide

Using DCIP 23

Using the Standalone Application

You can apply SCE on the target system using the CCTK standalone

application in one of the following ways:

• Double-click the SCE, or

• From the command prompt, navigate to the directory where SCE is

located, and type

the name of the SCE file.

Example:

C:\Windows\CCTK\SCE>"<filename>"

SCE silently installs the settings on the target system. When the installation

completes, SCE generates a text file with the same name at the same

location. The text file contains all the applied options and the status of

execution for the SCE file.

If you have configured a setup or system password on the target system, and

while exporting SCE if you have not provided the same password in the

Validation Password dialog box (for more information, see

Exporting the

BIOS configuration file

), SCE cannot be applied on the target system.

However, while applying SCE from the command prompt, you can provide

the setup or system password of the target system.

Example of providing setup password:

C:\Windows\CCTK\SCE>"<filename>" --valsetuppwd=

Example of providing system password:

C:\Windows\CCTK\SCE>"<filename>" --valsyspwd=

Apply Operating System Image

NOTE: Before you begin this task, ensure that you have the required operating

system image file (.wim file) under the Operating System Images tree in ConfigMgr.

To apply operating system image:

From the left-hand side of the

Task Seq ue nce Edi tor

, under

Deploy

Operating System

, click

Apply Operating System Image.

You can choose from the following options:

• Apply operating system from a captured image

client_sccm.book Page 23 Tuesday, September 27, 2011 9:17 AM