Users Guide

Using DCIP 19
• Create a Dell-specific task sequence, which has a set of pre-specified
actions, using the
Dell Client Deployment template.
• Create a custom task sequence where you can add custom actions to the
task sequence.
Creating a Task Sequence Using the Dell Client Deployment Template
To create a task sequence using the Dell Client Deployment template:
1
Launch ConfigMgr by clicking Start  All Programs  Microsoft System
Center
 Configuration Manager 2007  Configuration Manager
Console
. The ConfigMgr Console is displayed.
2 On the DCIP for ConfigMgr console, go to Site Database  Computer
Management
 Operating System Deployment .
3 Right-click Task Se que nce s , then Bare Metal Client Deployment 
Create a Dell Client Deployment Template .
The
Create Dell Client Deployment Task Sequence window is displayed.
4 Enter the name of the task sequence in Task Sequence Name field.
5 Under Client Hardware Configuration , select the hardware items that
you want to configure in this task sequence.
NOTE: If you select the Configure BIOS check box and a CCTK package has
been previously created, then a task sequence template is created while
configuring your system BIOS. The CCTK package is selected by default and
the command line to run the SCE on the target system is populated
automatically. However, if a CCTK package has not been created then a
message No CCTK package has been detected. Please import CCTK SCE to be
able to change BIOS configuration is displayed. You can still configure your
system BIOS but a package will not be selected.
If you do not select the Configure BIOS check box, the
Configuring your System
BIOS option is unavailable.
6 Under Network (Admin) Account , enter your domain admin account
name and password.
7 Under Operating System Installation , select the operating system
installation type. The options are:
• Use an OS WIM image
• Scripted OS install
client_sccm.book Page 19 Tuesday, September 27, 2011 9:17 AM