Users Guide

14 Using CCTK GUI
3 Click Save .
Clearing Setup and System Passwords
You can clear the configured setup and system passwords.
To clear the passwords:
1
In the Edit mode, click the Value to Set text box of the required option.
The corresponding password dialog box is displayed.
NOTE: To display the password as clear text, select Display password in
clear text. If you select Display password in clear text, then the Confirm
Password text box is not displayed.
2 Enter a blank space in the Password textbox.
3 Enter a blank space in the Confirm Password textbox to confirm the
password.
If both the entries match, the a green check mark is displayed next to the
Confirm Password text box, else, a red X mark is displayed.
4 Click Save .
BIOS Setup or System Password Dialog box
While exporting the BIOS configuration as SCE, the BIOS Setup or System
Password dialog box is displayed prompting the user to provide a password. If
the target system has a setup or system password, then select the Use the
password information below option and type the same setup or system
password in the BIOS Setup or System Password dialog box. If the target
system does not have a setup or system password, then select No password is
required.
Password Protection Dialog box
While exporting a file or report with system or setup password, a password
protection dialog box is displayed. To export the file with the password as
clear text, click Continue. To export the file without password, click Mask.