Users Guide

Using CCTK GUI 13
See Also:
Validating the BIOS Options
Configuring Setup and System Passwords
You can set or change the setup password (setuppwd) and the system
password (syspwd.)
To edit the setup or system password:
1
In the Edit mode, click the Value to Set text box of the required option.
The corresponding password dialog box is displayed.
NOTE: To display the password as clear text, select Display password in
clear text. If you select Display password in clear text, then the Confirm
Password text box is not displayed.
Type the password in the Password textbox.
NOTE: The password must contain minimum four characters.
2 Type the same password in the Confirm Password textbox to confirm the
password.
If both the entries match, then a green check mark is displayed next to the
Confirm Password text box, else a red X mark is displayed.
Present Value Displays the current value of the option.
NOTE: You can view this option only if you have loaded the
settings of the host system.
Apply settings Select the check box to export the option. By default, all the
options having a value in the Va lu e t o s e t column are
selected.
Description Displays a short description of the option.
Command Line
Options
Displays the command line representation of the options.
NOTE: You can view this option only in Advance View.
Status Displays the status of the options in the loaded
configuration.
NOTE: The Status column is displayed only when you
validate.
Options Description