Reference Guide

94 Client Configuration Toolkit Options
--wirelesswitchchanges
--wirelesswitchnlanctrl
--wxanradio
PCI Reporting
The scan of the PCI bus will use a file to resolve PCI vendor and device codes
to vendor information strings. The format of the PCI output is as follows:
PCI Bus: 2, Device: 4, Function: 0
Valid Argument permit, deny
Description Permits or denies wireless switch changes. If the administrator
password is not set, this setting has no effect.
Example C:\>cctk --wirelesswitchchanges=permit
wirelesswitchchanges=permit
Valid Argument enable, disable
Description Enables or disables the wireless switch for the wireless LAN
control.
• enable — If the systems have a physical Wireless On/Off Switch ,
switch has no effect on the state of the wireless LAN radio.
•
disable — Switch turns the wireless LAN radio on and off.
Example C:\>cctk --wirelesswitchnlanctrl=enable
wirelesswitchnlanctrl=enable
Valid Argument disable, wlanon, wwanon
Description Sets the WLAN and WWAN options.
• disable — Disables both WLAN and WWAN.
•
wlanron — Enables WLAN radio and disables WWAN radio.
•
wwanon — Enables WWAN radio and disables WLAN radio.
Example C:\>cctk --wxanradio=disable
wxanradio=disable