Reference Guide

Client Configuration Toolkit Options 81
--uartpowerdown
--universalconnect
--usb30
Description Enables or disables single core-based turbo mode. When enabled,
Intel Turbo Boost Technology allows processor(s) to run at
frequencies higher than the advertised frequency.
Example C:\>cctk --turbomode=enable
turbomode=enable
Valid Argument on, off
Description Enables the operating system to power down UART or disables the
operating system from powering down UART.
Example C:\>cctk --uartpowerdown=on
uartpowerdown=on
Valid Argument enable, disable
Description Allows or denies Windows 95 from re-enumerating when a new
dock device is attached to the system.
• enable — Denies Windows 95 from re-enumerating when a new
dock device is attached to the system.
•
disable — Allows Windows 95 from re-enumerating when a new
dock device is attached to the system.
Example C:\>cctk --universalconnect=enable
universalconnect=enable
Valid Argument enable, disable
Description Enables or disables USB 3.0.
Example C:\>cctk --usb30=enable
usb30=enable