Reference Guide

Client Configuration Toolkit Options 77
--stealthmode
--strongpwd
--surroundview
--svctag
Description Sets the system to ACPI S1 or S3 sleeping state when the systems
enters standby mode.
Example C:\>cctk --standby=s1
standby=s1
Valid Argument enable, disable
Description Sets the operation mode of the system elements. If enabled, the
system elements operate in the pre-programmed stealth mode. If
disabled, the system elements operate in the normal mode.
Example C:\>cctk --stealthmode=enable
stealthmode=enable
Valid Argument enable, disable
Description Enables to enforce a strong password.
Example C:\>cctk --strongpwd=enable
strongpwd=enable
Valid Argument enable, disable
Description Enables or disables SurroundView to use an additional AMD PCIE
video card in conjunction with the onboard graphics card that
allows to use multiple monitors concurrently. It is applicable only
on the AMD platform.
Example C:\>cctk --surroundview=enable
surroundview=enable
Valid Argument Read-only