Reference Guide

Client Configuration Toolkit Options 75
--smartcardreader
--smarterrors
--snoopfilter
--speakervol
Example C:\>cctk --sma=disable
sma=disable
Valid Argument enable, disable
Description Enables or disables the smart card reader.
Example C:\>cctk --smartcardreader=enable
smartcardreader=enable
Valid Argument enable, disable
Description Enables or disables SMART errors.
Example C:\>cctk --smarterrors=enable
smarterrors=enable
Valid Argument enable, disable
Description Enables or disables the snoop filter option from the system BIOS.
Example C:\>cctk --snoopfilter=enable
snoopfilter
=enable
Valid Argument enable, disable, low, medium, high
Description Controls the volume of the speaker.
• enable — Enables the built-in speaker. The speaker is enabled at
the single system-supported volume. This should be used only if
the Speaker Volume Low/Medium/High attributes are not
supported by the system.
•
disable — Disables the built-in speaker.