Reference Guide

74 Client Configuration Toolkit Options
--setuppwd
--sfuenabled
--sma
Description Turns the serr Dmi messages on or off.
Example C:\>cctk --serrdmimsg=on
serrdmimsg=on
Valid Argument <password>
Description Sets the setup password. An argument is required. The password
cannot be reported. Initially you can set the password. If you want
to remove the password, provide one blank space and the old
password.
Example To set the password:
C:\>cctk --setuppwd=<new-password>
To change the password:
C:\>cctk --setuppwd=<old-password>
--valsetuppwd=<new-password>
To remove the password:
C:\>cctk --setuppwd= --valsetuppwd=<old-
password>
Valid Argument yes, no
Description Enables the verification of digital signatures in the BIOS update
payload prior to the update. If yes, the system BIOS can be updated
to versions that have valid digital signatures. However, it is not
possible to restore the value.
Example C:\>cctk --sfuenabled=yes
sfuenabled=yes
Valid Argument enable, disable
Description Enables or disables the processor sequential memory access.