Reference Guide

Client Configuration Toolkit Options 39
--chassisintrustatus
--clearsel
--cmosdefaults
Description Enables or disables the system to detect and report chassis
intrusion events to the system display on boot-up.
Example C:\>cctk --chasintrusion=enable
chasintrusion=enable
Valid Argument dooropen, tripped, doorclosed, tripreset
Description Displays the status of chassis intrusion. All the values are read-only
except tripreset.
• dooropen — Indicates chassis door is opened.
•
tripped — Indicates the chassis door is opened since the last time
the sensor detection logic was reset.
• doorclosed — Indicates chassis door is closed.
•
tripreset — Resets the sensor detection logic to detect the next
closed-to-open transition on the chassis door.
Example C:\>cctk --chassisintrustatus=tripreset
chassisintrustatus=tripreset
Valid Argument yes, no
Description Allows the system to erase or retain the contents of the system
event log when the system boots the next time.
Example C:\>cctk --clearsel=no
clearsel=no
Valid Argument enable, disable
Description Enables or disables the request for a default of CMOS values when
the system reboots.
Example C:\>cctk --cmosdefaults=enable
cmosdefaults=enable