Reference Guide

Client Configuration Toolkit Options 37
--bootseqset
--bootspeed
--boottimevideo
Valid Argument diskettefirst, harddiskonly, devlist, cdromfirst
Description Sets the Initial Program Load (IPL) device sequence for the next
system boot.
• diskettefirst — Sets the devices in the sequence: diskette, hard
drive, CD- ROM, and option ROMs (if available).
•
harddiskonly — Sets the devices in the sequence: hard drive and
option ROMs (if available).
• devlist — Sets the devices in the sequence: diskette, CD-ROM,
hard drive, and option ROMs (if available).
•
cdromfirst — Sets the devices in the sequence: CD-ROM,
diskette, hard drive, option ROMs (if available).
Example C:\>cctk --bootseqset=diskettefirst
bootseqset=diskettefirst
Valid Argument default, compatible
Description Sets microprocessor speed to default or compatible. If set to
compatible, the CPU speed will be significantly slower. This is
implementation dependent. There is no specific speed for
compatible, except that it is significantly slower than default.
Example C:\>cctk --bootspeed=default
bootspeed=default
Valid Argument onboard, addin
Description Sets the onboard or first add-in video controller for boot time
messages.
NOTE: Depending on the BIOS search and system slot layout, the
first add-in device changes
.
Example C:\>cctk --boottimevideo=onboard
boottimevideo=onboard