Reference Guide

36 Client Configuration Toolkit Options
or
C:\>cctk bootorder --enabledevice=1,3
--disabledevice
Description Disables a device in the boot sequence. Use the device number or
device short form as the argument.
Example C:\>cctk bootorder --disabledevice=
embnic,hdd.1
or
C:\>cctk bootorder --disabledevice=1,3
Example With
Sub Options
C:\>cctk bootorder --sequence=hdd.1,floppy
--enabledevice=cdrom,hdd.2 --disabledevice=
nic.1,hdd.3
--activebootlist Activates the boot list to UEFI or legacy. On re-boot, the system
boots based on the boot list specified.
NOTE: With --activebootlist, do not specify any other sub options,
such as
--sequence , --enabledevice , and --disabledevice .
Example C:\>cctk bootorder --activebootlist=uefi
--bootlisttype Specifies the boot list as UEFI or legacy. If you want to run any
bootorder options, such as sequence, enabledevice, and so on, on
the UEFI boot list, you must specify this sub option with UEFI
argument. The supported arguments are legacy and UEFI.
If --bootlisttype is not specified, running the bootorder sub options
applies changes on the legacy boot list.
Example C:\>cctk bootorder --bootlisttype=uefi
Example With
Sub Options
With the --bootlisttype=uefi option, you can specify the following
sub options: --sequence, --enabledevice, and --disabledevice.
C:\>cctk bootorder --bootlisttype=uefi
--sequence=hdd.1,floppy --enabledevice=
cdrom,hdd.2
C:\>cctk bootorder --bootlisttype=uefi
--sequence=hdd.1,floppy --enabledevice=
cdrom,hdd.2 --valuesetuppwd=password