Reference Guide

Client Configuration Toolkit Options 31
--autoonhr
--autoonmn
--batteryslicecfg
--bioscharacteristics
Valid Argument integers ranging from 0 to 23
Description Sets the auto on configuration in hours.
Example C:\>cctk --autoonhr=5
autoonhr=5
Valid Argument integers ranging from 0 to 59
Description Sets the auto on configuration in minutes.
Example C:\>cctk --autoonmn=30
autoonmn=30
Valid Argument standard, express, ac, auto
Description Configures the battery slice charging.
Example C:\>cctk --batteryslicecfg=standard
batteryslicecfg=standard
Valid Argument Read-only
Description Displays the features supported by the specific version of the BIOS.
This contains bit-flags which define support attributes for the
BIOS and the system. The first 32-bits are from the reference
specification available on the Distributed Management Task Force
at
dmtf.org. These must be set only if the system supports the
following features: ISA, EISA, PCI, PC Card/PCMCIA, PnP, APM,
Upgradeable BIOS, BIOS Shadowing allowed, VL VESA, ESCD.
• 32 to 47 are always set to 0 by Dell-developed BIOS.
• 48 sets to 1 if the built-in NIC supports MagicPacket.