Reference Guide

26 Client Configuration Toolkit Options
NOTE: Some of the following options or arguments may not be available on
all systems due to the BIOS version or hardware feature set. Entering CCTK on
a command line without arguments will display only those options that are valid for
your system. For more details, refer to
No option .
NOTE: If you configure a setup password and system password for the system,
while changing a BIOS value, type the setup password.
acpower
--activityled
Valid Argument off, last, on
Description Sets the behavior of the system after AC power is lost.
• off — When AC power is restored, the system remains turned off.
• on — When AC power is restored, the system turns on.
• last — When the AC power is restored, the system returns to the
state it was in when the power was lost.
Example C:\>cctk --acpower=off
acpower=off
Valid Argument actled, wlan, disable
Description Sets the Network Activity LED to any of the following:
• actled — Sets the Activity LED to be controlled by an
Advanced Configuration and Power Interface (ACPI)
operating system and driver.
• wlan — Sets the Activity LED as a wireless LAN radio on/off
indicator.
•
disable — Sets the Activity LED to be off always.
Example C:\>cctk --activityled=actled
activityled=actled