Users Guide

Using CCTK GUI 19
Exporting the File
You can export a customized configuration to apply the same settings on a
target client system. You can export both supported and unsupported
options.
Prerequisites for Exporting
The following are the prerequisites for exporting:
• The option must be configured.
•The
Apply Settings check box of the option must be selected.
You can export the configuration in the following formats:
• Self-Contained Executable — Click Export Configuration.exe on the
Create Configuration screen to export the configuration settings as a SCE
(.exe file).
A
Validation Password dialog box is displayed prompting the user to
provide a password. If you have configured the system or setup password in
the target system, type the same system or setup password in the
Vali dat ion Pass w ord dialog box. This option to set the password is
optional.
•
Report — Click Export Report to export the configuration settings as
read-only .html file. If you have configured the system or setup password
in the exporting file, see Password Protection Dialog box.
•
Configuration file — Click Export Configuration to export the
configuration settings as a .cctk or .ini file. If you have configured the
system or setup password in the exporting file, see Password Protection
Dialog box.
•
Shell script — The shell script is used to configure a Linux system.The
shell script is generated at the same location where SCE file is exported
and contains the same configuration as that of the SCE file.