Users Guide

18 Using CCTK GUI
• If the boot order type is not specified and the loaded configuration file has
only
hdd items, the system prompts the user to select the boot order type.
• If the boot order type is not specified for a legacy BIOS system and if you
add both UEFI and legacy devices, the system displays a warning and
removes the legacy or UEFI devices depending on the order of occurence
of the devices.
Validating the BIOS Options
You can validate the options of a BIOS package against the configuration of
the current system using the Va li d at e option available on the GUI. You can
validate the settings of a multi-platform file, the current system file, or a
saved file. Y
ou can validate all the options except bootorder , syspwd , and
setuppwd options.
To validate the options, on the Create Configuration screen, click Val i da t e.
For a multi-platform file and a saved file:
• If the option and the configured value are supported on the host system, a
green check mark is displayed in the
Status column.
• If the option is supported and if the configured value is not supported on
the host system, a red
X mark is displayed in the Status column.
• All unsupported options are greyed out and the
Status column remains
blank.
• All the supported options on the host system are highlighted and the
Status column remains blank with the Val ue to Set field as Not Specified .
For the current system file and a saved file:
• All the options that are applicable on the host system are highlighted and a
green check mark is displayed in the
Status column.
• All unsupported options are greyed out and the
Status column remains
blank.
NOTE: You can configure the supported options on the host system even after you
validate.