Setup Guide

Quick Installation Guide 7
Important Information
To run CCTK commands, you must install Hardware Application
Programming Interface (HAPI) version 5.9.4 on the system. The common
scenarios are:
• If the system does not have HAPI, when you run a CCTK command, HAPI
is installed automatically. After the option is configured, HAPI is
uninstalled.
• If the system has an older version of HAPI, when you run a CCTK
command, HAPI is automatically upgraded to the latest version. In this
scenario, HAPI is not downgraded to the earlier version.
• If you run CCTK commands frequently, it is recommended that you
install HAPI before you execute CCTK commands. To install HAPI:
a Navigate to the HAPI directory ( \X86 in 32-bit system and \X86_64 in
64-bit system).
b Run HAPIInstall.bat .
CCTK for Windows PE
For client systems that do not have an operating system installed, you can
create a bootable image that contains CCTK to run the CCTK commands on
Windows Pre-installation Environment (Windows PE). Windows PE
provides a standalone pre-installation environment that is used to prepare a
system for Windows installation. To create a Windows PE image, you can use
Microsoft Windows Automated Installation Kit (Windows AIK).
Using Windows PE 2.0, you can integrate CCTK, HAPI, and related drivers
into a Windows Imaging Format (WIM) file and create a bootable ISO
image. Using Windows PE 3.0, you can integrate CCTK, HAPI, and related
drivers directly into a bootable ISO image. For more information, see
Creating a Bootable Image using Windows PE .
cctk_qig.book Page 7 Thursday, May 5, 2011 5:26 PM