Reference Guide

Client Configuration Toolkit Options 95
--smartcpu
Valid Argument
enable, disable
Description
Defines whether to enable the processor to slow down when possible.
--speakervol
Valid Argument
enable, disable, low, medium, high
Description
Controls the volume of the speaker.
• enable — Enables the built-in speaker. The speaker is enabled at the
single system-supported volume. This should be used only if the
Speaker Volume Low/Medium/High attributes are not supported by
the system.
• disable — Disables the built-in speaker.
• low — Sets the volume of the built-in speaker to low.
• medium — Sets the volume of the built-in speakers to medium.
• high — Sets the volume of the built-in speakers to high.
Example
C:\>cctk --speakervol=low
speakervol=low