Reference Guide

Client Configuration Toolkit Options 115
Description
Validates the system password while setting a value in the BIOS. This is
applicable only if you set a system password and did not set a setup
password.
Example
C:\>cctk --numlock=enable --valsyspwd=<password>
numlock=enable
--vaphysicalpresenceconfirm
Valid Argument
off, on
Description
Sets the VA Physical Presence Confirmation. If set to off , it will allow VA
install application to make virtual appliance configuration changes
without rebooting. If set to
on , it forces VA install application to reboot
the system to make virtual appliance configuration.
Example
C:\>cctk --vaphysicalpresenceconfirm=off
vaphysicalpresenceconfirm=off
--vgadacsnoop
Valid Argument
enable, disable
Description
Enables or disables the VGA DAC Snoop in BIOS.
Example
C:\>cctk --vgadacsnoop=enable
vgadacsnoop=enable