Reference Guide

100 Client Configuration Toolkit Options
--syspwd
Valid Argument
< password >
Description
Sets the system password. An argument is required. The password cannot
be reported. Initially you can set the password using CCTK. If you want to
remove the password, provide one blank space and the old password.
NOTE: You can set, remove, or change the password using -i option. It is
recommended to specify the password at the end of the .ini file. If you want to
remove the password using -i option, just provide a blank space for the
syspwd argument in the .ini file.
Example
C:\>cctk --syspwd=<password> --valsyspwd=<old-
password>
--sysrev
Valid Argument
Read-only
Description
Reports the system revision.
Example
C:\>cctk --sysrev
sysrev=000
--sysbatcharger
Valid Argument
enable, disable