Users Guide

64 CCTK Options
--embraidchannelashadowcopy
Valid Argument
raid, scsi
Description
Sets the channel A of the embedded RAID controller to operate in RAID
or SCSI mode when the system boots the next time.
NOTE: The setting is valid only if the embedded RAID controller is set to RAID
mode.
Example
C:\>cctk --embraidchannelashadowcopy=raid
embraidchannelashadowcopy=raid
--embraidchannelbshadowcopy
Valid Argument
raid, scsi
Description
Sets the channel B of the embedded RAID controller to operate in RAID
or SCSI mode on the previous system boot.
NOTE: The setting is valid only if the embedded RAID controller is set to RAID
mode.
Example
C:\>cctk --embraidchannelbshadowcopy=raid
embraidchannelbshadowcopy=raid
--embsasctrl
Valid Argument
disable, enable