Users Guide

CCTK Options 65
Description
Configures to report all the errors or only the first error on the front panel
LCD.
Example
C:\>cctk --frontpanelerrdisplaymode=aller
frontpanelerrdisplaymode=aller
--forcepxenextboot
Valid Argument
enable, disable
Description
Enables or disables Force PXE on next boot in BIOS.
If enabled, when the BIOS boots next time, the first PXE-capable device is
inserted as the first device in the boot sequence. Enabling this value causes
this operation on the next boot only, and does not cause a change in the
defined boot sequence of the system. The BIOS chooses the first PXE-
capable device as the onboard network controller of the system, if present
and enabled, or the first bootable network device found in the standard
PCI search order of the system- whichever comes first.
If disabled, the boot override feature is disabled and the system boot
sequence is in effect.
Example
C:\>cctk --forcepxenextboot=enable
forcepxenextboot=enable
--fsboptimize
Valid Argument
off, on
Description
Enables or disables high bandwidth FSB application optimizations.