Users Guide

CCTK Options 125
Description
Defines the wake-on-LAN feature.
• enable — The system wake-on-LAN feature is enabled; either an
onboard or an add-in NIC can wake the system up.
• disable — The system does not respond to magic packets or other
means of wake-on-LAN. The NIC chip section that looks for packets
will not be powered.
• addincard — Enables NICs, plugged into the special power connector,
as the source of any wake-on-lan signal.
• onboard — The onboard NIC is enabled for wake-on-lan.
• enablewakeonwlan — Enables wake-on-lan for wireless.
• lanorwlan — On systems that have onboard LAN and wireless LAN
hardware, enables wake on either wired or wireless LAN.
Example
C:\>cctk --wakeonlan=disable
wakeonlan=disable
--wakeonlanbootovrd
Valid Argument
enable, disable
Description
Enables or disables the wake on lan boot override feature.
• enable — When the system powers on due to a wake-on-LAN event,
the NIC boot-ROM is automatically given the highest boot priority,
pre-pending the PXE boot-ROM to the system current boot sequence.
If the system powers on due to some other event, this selection does
not influence the boot sequence.
• disable — Disables the boot override feature and the system boot
sequence is in effect for all types of system power on.