Users Guide

128 Messages and Codes
47 Command response could not be provided. Device
in firmware update mode.
48 Command response could not be provided. SDR
Repository in update mode.
49 Cannot execute command, SEL erase in progress.
50 Attempt to set the 'set in progress' value when
not in the 'set in complete' state.
51 The SOL character accumulate interval is invalid.
52 The SOL character send threshold is invalid.
53 The SOL retry interval is invalid.
54 Command completed successfully.
55 Time-out while processing command. Response
unavailable.
56 Unspecified error.
57 The password may only contain printable
ASCII characters.
58 Username cannot exceed 16 characters.
59 Invalid VLANID value. Enter in dddd format.
60 Attempt to write read-only parameter.
61 BMC is busy.
62 Response data did not return successfully.
63 BMC time out error.
64 Invalid Configuration Option.
65 Cannot execute command. Parameter is illegal
because command sub-function has been disabled
or is unavailable.
66 Option '%s' requires an argument.
67 The asset tag for this system is not available.
Table B-1. CCTK Error Codes and Messages
(continued)
Error
Code
Message