Users Guide

92 CCTK Options
--wakeonlan
Valid Argument
enable, disable, network, bootseq, addincard, onboard, enablewakeonwlan,
lanorwlan
Description
Defines the wake-on-LAN feature.
enable: the system wake-on-LAN feature is enabled; either an onboard or
an add-in NIC can wake the system up.
disable: the system will not respond to magic packets or other means of
wake-on-LAN. The NIC chip section that looks for packets will not be
powered.
network: when the system powers on due to a wake-on-LAN event,
the NIC boot-ROM is automatically given the highest boot priority,
pre-pending the PXE boot-ROM to the system current boot sequence.
If the system powers on due to some other event, this selection does not
influence the boot sequence.
bootseq: disables the boot override feature and the system boot sequence
is in effect for all types of system power on.
addincard: enables NICs, plugged into the special power connector, as the
source of any wake-on-lan signal.
onboard: the onboard NIC is enabled for wake-on-lan.
wakeonwlan: enables wake-on-lan for wireless.
lanorwlan: on systems that have onboard LAN and wireless LAN hardware,
enables wake on either wired or wireless LAN.
Example
A:>cctk --wakeonlan=disable
wakeonlan=disable