Setup Guide

Contents 5
Creating a Storage Repository
on PowerVault MD3000i
and MD32x0i Storage Arrays
. . . . . . . . . . . . 29
Dell EqualLogic PS Series
. . . . . . . . . . . . . . . . 32
Creating a Storage Repository on
Dell EqualLogic PS Series Arrays
. . . . . . . . . 32
6 Best Practices . . . . . . . . . . . . . . . . . . . . . 33
High Availability Configuration and
IP Storage Traffic Segregation . . . . . . . . . . . . . 33
Adjusting SCSI Timeouts to Tolerate
Storage Controller Failures
. . . . . . . . . . . . . . . 33
Adjusting SCSI Timeouts for the
PowerVault MD3000 RAID Enclosure
. . . . . . . 34
Adjusting SCSI Timeouts for the
PowerVault MD3000i Storage Arrays. . . . . . . . 34
Configuring XenServer Management Network
for High Availability
. . . . . . . . . . . . . . . . . . . 35
A Appendix: Recovering XenServer
After a Board Replacement . . . . . . . . . . . . . 37