Setup Guide

Best Practices 35
Using an iSCSI initiator inside a VM is the same as using an iSCSI initiator in
a physical system. For specific steps to install the relevant Dell multi-pathing
drivers and supported iSCSI initiators, and to attach the PowerVault
MD3000i volumes to a VM using the iSCSI initiator inside the VM, see the
MD3000i Systems Installation Guide at support.dell.com/manuals. There are
no extra steps required to modify the SCSI timeouts when Dell multi-pathing
drivers control the LUN(s) on a PowerVault MD3000i array.
Configuring XenServer Management Network for
High Availability
For detailed instructions on configuring XenServer management network for
high availability, see the Creating NIC Bonds section of the XenServer 5.6
Feature Pack 1 Administrator’s Guide at mycitrix.com.