Setup Guide

Configuring Storage 31
b If you have already created one or more host groups, select the radio
button enabling selection from a drop-down menu that lists the
existing host groups. Use this option to configure the rest of the hosts
in a group. After you select the host group, previously configured hosts
for that host group are displayed.
NOTE: These host groups are shown as Linux hosts even though they are
configured as XenServer hosts.
9 Select Next . A confirmation screen in which the new server being
configured is displayed and the other previously configured associated
hosts are named. For the first server configured in a new host group, no
associated hosts are listed under the
Associated host group .
10 Select Finish to confirm the new host definition. This initiates the wizard
configuration of the new host.
11 On completion, select Yes to proceed to the next host you wish to
configure, or select
No to end the configuration wizard.
12 Return to XenCenter and create a new SR by connecting to the desired
XenServer host and clicking on its
Storage tab.
13 Click Add , choose the iSCSI radio button for Virtual disk storage,
and click
Next .
14 Enter the name for the new SR in the Name field.
15 Enter the portal IP address of the PowerVault MD3000i and MD32 x 0i
controller that owns the LUN created in step 2 in the target host field.
16 Enter 3260 in the port field.
17 Click on Discover IQNs and Discover LUNs to populate the Target IQN
and
Target LUN fields.
18 Select the appropriate LUN and click Finish to create a new SR.