Setup Guide

76 Appendix
Manage Server Using XenCenter
Provides a download link to get the XenCenter application from the Citrix
XenServer Dell Edition website at citrix.com/xenserver/dell.
Network and Management Interface
Provides a menu of commands for setting up network configuration of the
management interface.
Configure Management Interface
Allows you to select and configure which of the Network Identification Cards
(NICs) available on the system is used as the XenServer management
interface.
Add/Remove DNS Servers
Allows you to manage DNS servers. For example, add additional servers, or
remove existing servers.
Network Time (NTP)
Allows you to configure network time servers for synchronizing clock time
between servers. You can enable or disable NTP, and add or remove NTP
servers.
Test Network
Allows you to use the Linux ping command for testing the configured
network. You can ping several fixed addresses such as the local address, the
gateway address, or an Internet address. You can also choose to ping a custom
address by providing an IP address.
Display NICs
Displays the network interfaces on the server by description, device name,
and MAC address, and shows if they are connected or not.
Authentication
Log In/Out
Provides a login prompt.