Setup Guide

Configuring Storage 29
Configuring Storage
Local Storage Repository (SR) Configuration
A local storage repository (SR) is a storage for virtual machines (VMs) on the
local hard disk drives of a Dell™ PowerEdge™ system. Depending on the
storage configuration of the server, a local SR may be automatically created
during the Citrix
®
XenServer
®
Dell™ Edition boot. A local SR is
automatically created on the system if the local storage volume has a Dell
utility partition (UP) or a Dell UP and a Dell No Operating System (NOS)
partition.
Typically, a system ordered with local storage and XenServer is configured
with both Dell UP and NOS partitions. Therefore, a Local SR named Local
Storage is created at first boot.
If no SR is created, follow the steps below to create a new SR.
Step 1: Creating a New Storage Volume
Using the storage controller BIOS or OpenManage Server Administrator
Storage Manager, create a new storage volume on the XenServer host.
Creating a Volume Using Controller BIOS
A new storage volume can be created from the storage controller BIOS.
To create a new virtual disk using the controller BIOS, follow the appropriate
set of instructions for your controller card from your controller card
documentation available from the Dell Support website at support.dell.com.