Setup Guide

Configuring Storage 41
6 Click Discover IQNs to perform target discovery.
Each volume on an EqualLogic array has a unique target name with
LUN ID set to "0".
7 Select the appropriate IQN and then click Discover LUNs to discover the
LUN associated with the target.
8 Select the LUN and click Finish to create a new SR.
Creating an EqualLogic (Equal) SR
NOTE: To use an EqualLogic SR, the firmware version of the PS Series array must
be 4.0.1 or higher.
1 Configure the EqualLogic array, create a group, set a member RAID policy,
and create a volume by following the instructions available in the PS Series
online help.
2 Enable SSH access for the group members.
a In the PS Series group manager user interface, click Group
Configuration
, and then click the Administration tab.
b Under CLI access options for the group, select Enable SSH , and then
save the configuration.
3 Using the XenCenter interface, right-click on the XenServer host or the
pool for which you would like to create an SR and select
New Storage
Repository
.
4 In the Choose the type of new storage window, select Dell EqualLogic
and click
Next .
5 In the Enter the Dell EqualLogic file details window, enter a name for the
SR, the group IP of your PS Series group, the username and password for
an account with administrative privileges for the group or pool, and
optional CHAP credentials, if set on the array. Click
Next .
6 Under Reattach an existing SR or create a new SR , click to select Create a
new SR on the following storage pool
.
NOTE: You can view the details on the available storage pool, including
the size of the pool, available space, the number of existing volumes,
and members in the pool.