Setup Guide

Systems Management Using Dell OpenManage 25
To connect to the XenServer host and access the OpenManage Server
Administrator web-based interface, type the following web address in a
supported browser window from a client system:
https://<XenServer hostname/IP Address>:1311
NOTE: 1311 is the default port used by the OpenManage Web server.
The XenServer host firewall is pre-configured to allow ports used by
OpenManage Server Administrator, so no additional firewall configuration is
required. If you change the default OpenManage Server Administrator port
to a value other than 1311, make the associated change in
/etc/sysconfig/iptables. Restart the iptables service on the XenServer host by
running the following command on the XenServer local console shell:
$ service iptables restart
To check the version of OpenManage installed, run the following command
on the XenServer local console shell:
$ omreport about
To view the system summary, run the following command on the XenServer
local console shell:
$ omreport system summary
For more information on using OpenManage to manage Dell systems, see the
Dell OpenManage Server Administrator documentation available on the
Dell Support website at support.dell.com/manuals.