Users Guide

チェックボックスを選して、サスの電源管理(SBPM)を有にすると、次のメッセジが表示されます。
Checking the Server Based Power Management Mode option will set your power cap to max
value, server priorities to default priority, and disables Max Power Conservation Mode.
Are you sure you want to continue?
チェックボックスを選して、最大節電モド(MPCM)を有にすると、次のメッセジが表示されます。
Enabling Max Power Conservation Mode option will force servers into a low power, limited
performance mode and disable server power up. Press OK to continue.
シナリオ 3: 次の場合、EPP オプションがグレアウトされ、使用できません。
3000W PSU EPP が無になっており、および次のいずれかの電源設定が有になっている。
スの電源管理(SBPM
冗長性ポリシ: 電源装置冗長性または冗長性なし
最大電力節減モド(MPCM
動的電源供給(DPSE
システム入力電力上限が、13300W45381 BTU/h)以下に設定されている。
シャシに 6 台の 3000W PSU が搭載されていないか、EPP 対応していない PSU がある場合、EPP オプションはグレアウ
トされ、選できません。
張電源パフォマンスのシナリオ - RACADM を使用
シナリオ 1: racadm getconfig/config set コマンドを使用した、EPP 機能コントロルの管理(有 / 化)
3000W AC PSU 構成で EPP 機能を有にするには、次のコマンドを使用します。
racadm config -g cfgChassisPower -o cfgChassisEPPEnable 1
To disable EPP feature on a 3000W AC PSU configuration, use:
To disable EPP feature on a 3000W AC PSU configuration, use:
3000W AC PSU 構成で EPP 機能が有になっているかどうかを確認するには、次のコマンドを使用します。
racadm getconfig -g cfgChassisPower -o cfgChassisEPPEnable
シナリオ 2: racadm getpbinfo を使用した、EPP 機能のステタスを表示:
racadm getpbinfo
Extended Power Performance(EPP) Status = Enabled (inactive)
Available Power in EPP Pool = 3167 W (10806 BTU/h)
Used Power in EPP Pool = 0 W (0 BTU/h)
EPP Percent - Available = 100.0
シナリオ 3: CMC のログに記されている EPP 機能のコントロル操作を表示:
racadm getraclog
Jul 31 14:16:11 CMC-4C2WXF1 Log Cleared
Jul 31 14:15:49 CMC-4C2WXF1 Extended Power Performance is Enabled
Jul 31 14:15:49 CMC-4C2WXF1 Extended Power Performance is Disabled
シナリオ 4: EPP が有なときに、EPP と互換性のない電源構成プロパティを更する:
3000W AC PSU でサスの電力管理(SBMP)を有にする
racadm config -g cfgChassisPower -o cfgChassisServerBasedPowerMgmtMode 1
This feature is not supported while Extended Power Performance is enabled.
3000W AC PSU で動的電源供給を有にする
racadm config -g cfgChassisPower -o cfgChassisDynamicPSUEngagementEnable 1
This feature is not supported while Extended Power Performance is enabled.
使用事例シナリオ 255