Users Guide

Configuring CMC

CMC enables you to configure CMC properties, set up users, and set up alerts to perform remote management tasks.

Before you begin configuring the CMC, you must first configure the CMC network settings to allow the CMC to be managed remotely.

This initial configuration assigns the TCP/IP networking parameters that enable access to the CMC. For more information, see Setting Up

Initial Access to CMC.

You can configure CMC using Web interface or RACADM.

NOTE: When you configure CMC for the first time, you must be logged in as root user to execute RACADM commands

on a remote system. Another user can be created with privileges to configure CMC.

After setting up the CMC and performing the basic configuration, you can do the following:

• Modify the network settings if required.

• Configure interfaces to access CMC.

• Configure LED display.

• Setup Chassis Groups if required.

• Configure Servers, IOMs, or iKVM.

• Configure VLAN Settings.

• Obtain the required certificates.

• Add and configure CMC users with privileges.

• Configure and enable email alerts and SNMP traps.

• Set the power cap policy if required.

Related concepts

Logging In to CMC

Viewing and Modifying CMC Network LAN Settings

Configuring CMC Network and Login Security Settings

Configuring Virtual LAN Tag Properties for CMC

Configuring Services

Configuring LEDs to Identify Components on the Chassis

Setting Up Chassis Group

Configuring Server

Managing Input Output Fabric

Configuring and Using iKVM

Obtaining Certificates

Configuring User Accounts and Privileges

Configuring CMC To Send Alerts

Managing and Monitoring Power

Configuring Multiple CMCs through RACADM Using Configuration File

Topics:

• Viewing and Modifying CMC Network LAN Settings

• Configuring CMC Network and Login Security Settings

• Configuring Virtual LAN Tag Properties for CMC

• Federal Information Processing Standards

• Configuring Services

• Configuring CMC Extended Storage Card

• Setting Up Chassis Group

• Obtaining Certificates

• Chassis Configuration Profiles

Configuring CMC 69