Users Guide

Updating IOM Infrastructure Device Firmware

By performing this update, the firmware for a component of the IOM device is updated, but not the firmware of the IOM device itself; the

component is the interface circuitry between the IOM device and CMC. The update image for the component resides in the CMC file

system, and the component displays as an updatable device on the CMC Web interface only if the current revision on the component and

the component image on CMC do not match.

Before updating IOM infrastructure device firmware, make sure the CMC firmware is updated.

NOTE:

CMC allows IOM infrastructure device firmware (IOMINF) updates only if it detects that the IOMINF firmware is out-of-date with the

image contained in CMC file system. If the IOMINF firmware is up-to-date, CMC prevents IOMINF updates. Up-to-date IOMINF devices

are not listed as updatable devices.

Related concepts

Downloading CMC Firmware

Viewing Currently Installed Firmware Versions

Updating IOM Software Using CMC Web Interface

Updating IOM Coprocessor Using CMC Web Interface

To update the IOM Infrastructure device firmware, in the CMC Web interface:

1. Go to Chassis Overview > I/O Module Overview > Update.

The IOM Firmware Update page is displayed.

Alternatively, go to any of the following:

• Chassis Overview > Update > IOM Coprocessor

• Chassis Overview > CMC Firmware > Apply CMC Update > IOM Coprocessor

• Chassis Overview > iKVM Firmware > Apply iKVM Update > IOM Coprocessor

The Firmware Update page is displayed, which provides a link to access the IOM Firmware Update page.

2. In the IOM Firmware Update page, in the IOM Firmware section, select the checkbox in the Update column for the IOM you want

to update the firmware and click Apply Firmware Update .

The Update Status section provides firmware update status information. A status indicator displays on the page while the image file

uploads. File transfer time varies based on connection speed. When the internal update process begins, the page automatically

refreshes and the Firmware update timer is displayed.

NOTE:

• Do not click the Refresh icon or navigate to another page during the file transfer.

• The file transfer timer is not displayed when updating IOMINF firmware.

• If the IOM Coprocessor has the latest firmware version, the check box is not displayed in the Update column.

When the update is complete, there is a brief loss of connectivity to the IOM device since it resets and the new firmware is displayed

on the IOM Firmware Update page.

Updating IOM Firmware Using RACADM

To update IOM infrastructure device firmware using RACADM, use the fwupdate subcommand. For more information, see Chassis

Management Controller for Dell PowerEdge M1000e RACADM Command Line Reference Guide.

Updating Server iDRAC Firmware Using Web

Interface

To update the iDRAC firmware in the server using in the CMC Web interface:

1. Go to any of the following pages:

• Chassis Overview > Update

Updating Firmware