Users Guide

Item Description
Model Number Displays if iDRAC finished booting.
Service Tag Displays if iDRAC finished booting.
BIOS Version Server BIOS firmware version.
iDRAC DNS Name Displays the DNS name of the iDRAC server.
Last POST Code Displays the last server BIOS POST code messages string.
iDRAC Firmware Version Displays if iDRAC finished booting.
NOTE: iDRAC version 1.01 is displayed as 1.1. There is no iDRAC version 1.10.
IP4 <enabled, disabled> Displays the current IPv4 enabled state.
IP4 Address: <address,
acquiring>
Only displays if IPv4 is enabled.
IP6 <enabled, disabled> Only displays if iDRAC supports IPv6. Displays current IPv6-enabled state.
IP6 Local Address:
<address>
Only displays if iDRAC supports IPv6 and IPv6 is enabled.
IP6 Global Address:
<address>
Only displays if iDRAC supports IPv6 and IPv6 is enabled.
FlexAddress enabled on
Fabrics
Only displays if the feature is installed. Lists the fabrics enabled for this server (that is, A, B, C).
The information in the table is dynamically updated. If the server does not support this feature, then the following information does not
appear, else Server Administrator options are as follows:
• Option “None” = No strings must be displayed on the LCD.
• Option “Default” = No Effect.
• Option “Custom” = Allows you to enter a string name for the server.
The information is displayed only if iDRAC has completed booting. For more information on this feature, see the Chassis Management
Controller for Dell PowerEdge M1000e RACADM Command Line Reference Guide at dell.com/support/manuals.
232
Using LCD Panel Interface