Users Guide

要启用或禁用动态 PSU 接入请键入
racadm config -g cfgChassisPower -o cfgChassisDynamicPSUEngagementEnable <value>
其中<value> 0禁用),1启用。默认值为 0
例如以下命令禁用动态 PSU 接入
racadm config -g cfgChassisPower -o cfgChassisDynamicPSUEngagementEnable 0
要启用最大节能模式请键入
racadm config -g cfgChassisPower -o cfgChassisMaxPowerConservationMode 1
若要恢复正常操作请键入
racadm config -g cfgChassisPower -o cfgChassisMaxPowerConservationMode 0
启用 110V 交流 PSU
racadm config -g cfgChassisPower -o cfgChassisAllow110VACOperation 1
启用“服务器性能优于电源冗余”
racadm config -g cfgChassisPower -o cfgChassisPerformanceOverRedundancy 1
禁用“服务器性能优于电源冗余”
racadm config -g cfgChassisPower -o cfgChassisPerformanceOverRedundancy 0
要启用电源远程日志记录功能请键入以下命令
racadm config -g cfgRemoteHosts -o cfgRhostsSyslogPowerLoggingEnabled 1
要指定所需的日志记录间隔请键入以下命令
racadm config -g cfgRemoteHosts -o cfgRhostsSyslogPowerLoggingInterval n
其中 n 1 1440 分钟。
要确定是否已启用电源远程日志记录功能请键入以下命令
racadm getconfig -g cfgRemoteHosts -o cfgRhostsSyslogPowerLoggingEnabled
要确定电源远程日志记录间隔请键入以下命令
racadm getconfig -g cfgRemoteHosts -o cfgRhostsSyslogPowerLoggingInterval
电源远程日志记录功能取决于先前配置的远程系统日志主机。必须启用记录到一个或多个远程系统日志主机否则将记录功
耗。这可以通过 Web 界面或 RACADM CLI 启用。有关更多信息请参阅 dell.com/support/manuals 上的 Chassis
Management Controller for Dell PowerEdge M1000e RACADM Command Line Reference Guide适用于 Dell PowerEdge
M1000e Chassis Management Controller RACADM 命令行参考指南中的远程系统日志配置说明。
要使用 Dell OpenManage Power Center 启用远程电源管理请键入
racadm config -g cfgChassisPower -o cfgChassisServerBasedPowerMgmtMode 1
要恢复 CMC 电源管理请键入
racadm config -g cfgChassisPower -o cfgChassisServerBasedPowerMgmtMode 0
有关机箱电源的 RACADM 命令的信息请参阅 Chassis Management Controller for Dell PowerEdge M1000e RACADM Command
Line Reference Guide适用于 Dell PowerEdge M1000e Chassis Management Controller RACADM 命令行参考指南中的
configgetconfiggetpbinfo cfgChassisPower 部分。
198
管理和监测电源