Release Notes

Release 5.20

• Federal Information Processing Standards (FIPS) 140-2 cryptography capability.

• Disabling AC Power Recovery.

• Performing racresetcfg from CMC GUI.

• Updating the OpenSSL open source package to version 1.0.2f.

• Updating the OpenSSH open source package to version 7.1p1.

• Updating glibc to version 2.23 to address new security vulnerabilities.

• TLS 1.2 and TLS 1.1 by default.

• User configuration option to enable TLS 1.0 using RACADM.

• SNMPv3 configuration only in RACADM.

• Querying the health status of the chassis components using WSMan.

• Initiating Quick Deploy of blade through RACADM.

• Configuring CMC using WSMan for the following features:

• Host Name of Chassis

• IP Configuration

• DNS

• DNS Registration

• NTP

• Change Default Password

• Sending alerts when the power state of an IOM changes and when a power ON of IOM fails.

• Populating CMC Device name correctly in the inventory.

Release 5.13

• Added a RACADM command to enable or disable CMC failover due to network link loss.

• To check CMC changeover state for network failure: racadm cmcchangeover --state

• To enable this flag : racadm cmcchangeover -e 1

• To reset this flag : racadm cmcchangeover -e 0

Release 5.12

• Quick link to the Dell Tech Center page from the CMC web GUI.

Release 5.10

• Firmware and driver refresh of COMMs cards on Dell's 13th generation of PowerEdge servers.

• Capture and replicate chassis configurations through XML based on the Chassis configuration profile.

• Support for blinking server identification LED from Quick Link on the Homepage.

• Backup or restore through XML based on the chassis configuration profile.

• Create and deploy a library of Boot Identity Profiles (boot from iSCSI/SAN configurations) to enable a quick restore of workload to a

spare server.

• Populate iDRAC DNS setting from the CMC Quick Deploy page.

• Display iDRAC DNS name as the slot name.

• Option to view iDRAC LCLog results directly in CMC after applying a Server Configuration Profile.

• Support for launching IOA GUI on Homepage, I/O Module overview page.

• Support to list IOA Flex modules on IOM properties page and in tooltip.

Release 5.01

• CMC Secure IOM mode is implemented in CMC 5.01 Secure IOM provides additional CMC security in support of MXL IOMs running in

UC-APL secured environments.

What is New