CLI Guide

server-4 3.50 (Build 4) PowerEdgeM710HD iDRAC6
Table 91. Details
< Server > < CPLD Version > < Blade Type >
server-1 1.0.5 PowerEdgeM520
server-2 1.0.3 PowerEdgeM610x
server-4 1.0.0 PowerEdgeM710HD
server-5 1.0.3 PowerEdgeM710
server-7 1.0.6 PowerEdgeM620
server-9 1.0.5 PowerEdgeM520
ifconfig
Table 92. Details of ifconfig attribute
Description Displays the contents of the network interface table.
To use this subcommand, you must have the Administrator privilege.
Synopsis
racadm ifconfig
Input N/A
Table 93. Example
eth0 Link encap:Ethernet HWaddr 00:1D:09:FF:DA:23
inet addr:192.168.0.0 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2550665 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:272532097 (259.9 MiB) TX bytes:0 (0.0 B)
krbkeytabupload
Table 94. Details of krbkeytabupload attribute
Description Uploads a Kerberos keytab file to CMC.
To run this subcommand, you must have the Configure Chassis Administrator privilege.
NOTE: This subcommand is only supported on the remote interface(s).
68 RACADM Subcommand Details