CLI Guide

Switch-3 MXL 10/40GbE 10 GbE KR Present 30
Switch-4 N/A None Not Present N/A
Switch-5 N/A None Not Present N/A
Switch-6 N/A None Not Present N/A
[Enhanced Cooling Mode]
Enhanced Cooling Mode(ECM) Status = Disabled
getioinfo
Table 40. Details of getioinfo attribute
Description Displays general information about the I/O modules on the chassis.
To run this subcommand, you must have the CMC Login User privilege.
NOTE: The fabric type may be any supported I/O fabric type, such as Ethernet, Fibre Channel, and
InfiniBand.
Synopsis
• racadm getioinfo [-m <module>] [-s]
• racadm getioinfo -o
• racadm getioinfo -m switch-<n> -o
Input
• -m <module> — Specifies the module or device.<module> must be switch — <n>, where n = 1–6
• -s — Displays stack information.
• -o — Displays IOA Flex module information. The possible values for the flex module type are:
• 0 — 4x10G Base-T FlexIO Module
•
1 — 4x10G SFP+ FlexIO Module
• 2 — 2x40G QSFP+ FlexIO Module
• 3 — 4xFC FlexIO Module
• 4 — No flex module installed
• >4 — Invalid
Example
•
Table 41. racadm getioinfo
<IO> <Name> <Type> <Presenc
e>
<POST> <Power
>
<Role
>
<SecureMod
e>
<Mode>
swit
ch-1
MXL
10/40G
bE
10 GbE
KR
Present OK ON Maste
r No
Full
Switch
swit
ch-2
PowerE
dge M
10 GbE
KR
Present OK ON Stand
alone
No
Standa
lone
44 RACADM Subcommand Details